Thursday, January 19, 2012
Tuesday, January 17, 2012
Coleman sent in his R5, which is currently for sale in Colorado:
For sale is a 1970 Yamaha R5 350. This bike runs awesome! It starts on the first kick. The whole bike has been went through, the motor and transmission were rebuilt by the previous owner. I have recently done timing and synched the carbs. The seat was redone using the original pan, and I installed a new (old style) tail light. It has DG pipes and a K&N air filter (no air box). I've put on new (stock) gauges (the milage on them isn't accurate) with working lights and bright background color. Recently changed the oil (Redline) and installed new tires. This bike isn't a show bike, but it runs really good. It is a dream to carve up a canyon and really nice to blow some steam off cruising to work and back... $2500, local pickup only. more pictures available upon request...
Contact info: MeVsRobots (at) gmail (dot) com
Location: Ft. Collins, Co.
Monday, January 16, 2012
Sunday, January 15, 2012
Mike writes in with an electrical question:
I recently purchased a not-quite-running Yamaha R5B, and first off I'd like to thank you for compounding all the information you have! your site has been a major help while I'm working on the bike, and for just learning all I can about it since it is my first motorcycle. I have two questions for you, the first is that the bike didn't come with front turn signals installed, but luckily I was able to get ahold of the correct pair from my uncle. Unfortunately my wiring knowledge is limited to replacing wires where the old ones were, but with your site's help I was able to hook up the brown and green wire clusters to their respective bulbs, but I am not sure where/how to ground them. Both have the eye terminal wires coming off of the bolts on the signals, but I am unsure of where exactly to plug them into. The second is that the bike has a short somewhere and keeps blowing the main fuse off the positive battery terminal. All lights/signals/horn work as they should it seems (except the ones I haven't grounded/hooked up). The bike starts, will run for a minute or so before either dying of a spent battery or the main fuse going. I started checking for continuity, and sure enough there was continuity between the positive and negative battery hook-ups with the key on, started following it back and it lead me to the red wire entering the rectifier. I'm not sure where to go/what to do from there, or even if there is supposed to be continuity through there! Do you have any insight/ideas for tracing the fault? Thanks again for the site, and any thoughts you may have!Any feedback or suggestions greatly appreciated.
Thursday, January 5, 2012
Geoff writes in with a few questions on gearing:
I recently purchased my first 1972 Yamaha R5C from a coworker for $100!! (The bike has 11,000 miles on it) When searching for restoration info I came across your amazing site. I am anxious to start riding this beauty ASAP and was looking for a little advice. I am finding that most people start with handling and engine issues. The engine appears to be running well, but I feel I need to replace a few key components (sprockets, chain, brake shoes, etc.) I am having trouble finding concise info on how to gear the bike. Do you have any suggestions on what size front and rear sprockets to use and what type of chain? This is my first street 2 stroke and I will be using it mostly for occasional pleasure riding. Any help or referrals to info would be greatly appreciated!